D760-0034 – Carbon Fiber Cold Air Intake for BMW 1M E82

Part Number: D760-0034 Category:
Please call 1-408-866-0606 for availability.

As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power.

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Additional Information

As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPM s for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat. With a peak horsepower of 398 at 5700 rpm and the peak torque of 429 lb-ft at 4300 rpm as tested with Dinan High Capacity Oil Cooler System, intercooler and Dinan Free Flow Exhaust is a monumental increase from stock. Stock car gains 5 Hp and 6 ft-lb torque & Dinan Performance Software is highly recommended.

Horsepower is increased by 14 Hp @ 6000 rpm and Torque is increased by 16ft-lbs @ 3400 rpm with Dinan Stage 3 Software, DINAN Intercooler and Free Flow Exhaust.

Stage 2 software, Free Flow Exhaust produces 12 Hp and 13 ft-lb torque Stage 1 software, Free Flow Exhaust produces 9 Hp and 10 ft-lb torque.

Completely Stock car produces 5 Hp and 6 ft-lb torque.

Continue reading..

FITS

  • 2011 BMW 1 Series M Base Coupe

Emissions

  • Emission Code: 7
  • E.O. Status: Legal under the provisions of EPA’s memorandum 1A – Not legal in CA
  • E.O. Number: