CBF9X-0003 – EVO Smooth Power Stage 3 Software for F9X M5 Base/Competition 2018-2020

$1,750.00$3,850.00

Note: *This can ONLY be installed at an Authorized CarBahn dealer.

-

Stock- 93 Octane 
Stock Wheel HP & TQ: 587 WHP & 565 lb-ft WTQ 
Stock Flywheel HP & TQ: 716 HP & 689 lb-ft TQ 

Tuned- 93 Octane 
Tuned Wheel HP & TQ: 676 WHP & 639 lb-ft WTQ 
Tuned Flywheel HP & TQ: 824 HP & 779 lb-ft TQ 
Delta Wheel HP & TQ: 89 WHP 74 lb-ft WTQ 
Delta Flywheel HP & TQ: 109 HP & 90 lb-ft TQ 

Tuned- 100 Octane 
Tuned Wheel HP & TQ: 723 WHP & 652 lb-ft WTQ 
Tuned Flywheel HP & TQ: 882 HP & 795 lb-ft TQ 
Delta Wheel HP & TQ: 136 WHP 87 lb-ft WTQ 
Delta Flywheel HP & TQ: 166 HP & 106 lb-ft TQ 

 

  • CarBahn EVO Intelligent software adapts to various fuel octane levels seamlessly, optimizing performance without compromising safety. It retains existing safety features and adds extra protection as needed. 
  • Includes Competition Models
  • Top Speed Governor Removed

Philosophy: 

CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction. 

CarBahn’s Heat Exchanger, combined with larger dual Intercoolers, create an exceptionally efficient heat exchanging package. This setup enables maximum boost and allows for the extraction of maximum power from your engine. By integrating additional Heat Exchanger and replacing the OEM Intercoolers with larger units, effectively extracts more heat from the turbo discharge air. These components are specifically designed to handle the increased heat generated by higher boost levels. The CarBahn system reduces intake air temperature, resulting in increased air density, which is crucial for achieving maximum power output and ensuring engine reliability in high boost applications.  CarBahn has successfully engineered and manufactured the industry’s largest and most thermally efficient Heat Exchanger. By employing innovative design techniques, CarBahn has achieved a remarkable 40% increase in cooling capacity compared to existing Heat Exchangers in the market. Drawing inspiration from Formula 1 Heat Exchanger technology, CarBahn has integrated high-performance features and optimized flow dynamics to ensure unparalleled heat transfer efficiency. In addition to its superior thermal performance, CarBahn’s race inspired design boasts a remarkable reduction in weight, thanks to the implementation of advanced lightweight materials and improved structural design. When paired with the 3.5bar MAP sensor and Stage 3 Software, this combination significantly boosts power while ensuring safety. 

 

Durability: 

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage. 

 

Do-it-yourself Approach: 

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity. 

 

Emissions Legality: 

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement. 

 

About Steve Dinan: 

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines. 

 

Warranty Information:

* Registration with CarBahn at the time of purchase is required to maintain matching warranty coverage. CarBahn reserves the right to deny warranty program enrollment under certain conditions. Please contact us before making a purchase if you have any questions. 

* The warranty is valid for U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), starting from the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn warranties are transferable when ownership of the vehicle into which the CarBahn products were originally installed is sold. The warranty will repair or replace, without charge for parts or labor, the defective CarBahn component(s) as well as any original vehicle manufacturer component(s) directly affected by a CarBahn component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn. Parts replaced under this limited warranty become the property of CarBahn. A reasonable period must be allowed for warranty repairs to be completed in all cases. If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, CarBahn will, at its sole discretion, repair or replace any defective CarBahn component for two (2) years from the original purchase date of the CarBahn product. This warranty does not include reimbursement for repairs to any original vehicle manufacturer component(s) that may have been affected by a CarBahn component. 

 

* Warranty exclusions: 

The following are not covered under the warranty: return shipping charges, towing charges, rental car fees, damage to a component or assembly due to the installation of replacement parts that materially differ from the original vehicle manufacturer or CarBahn parts, damage resulting from the unauthorized modification of a CarBahn part or assembly, damage resulting from the use of other manufacturer products in conjunction with CarBahn products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant, and refrigerant, mechanical adjustments or repairs resulting from normal wear and tear, drive belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, engine damage resulting from alteration of CarBahn’s original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as refurbished and are warranted for the specified period). 

Leave A Review

Additional information

Weight 7 lbs
Dimensions 12 × 10 × 6 in
Matching Warranty

No Matching Warranty [+$0], Matching Factory Warranty [+$2000]

Reviews

There are no reviews yet.

Be the first to review “CBF9X-0003 – EVO Smooth Power Stage 3 Software for F9X M5 Base/Competition 2018-2020”

Your email address will not be published. Required fields are marked *

Vehicles

Vehicles Description

Make Model Year
Make Model Year
BMW M5 2018
BMW M5 2019
BMW M5 2020
BMW M5 Competition 2019
BMW M5 Competition 2020

Title

Go to Top