Skip to product information
1 of 3
2 FREE AIR FILTERS WITH PURCHASE

704 HP Stage 2 Performance Controller Power Package | BMW G8X M3/M4

Checking availability
Part Number: CBG8X-9003-AT
Free Standard U.S. Shipping
$2,795.00
Check if this fits your car
HORSEPOWER
704 HP +113 HP
Stock: 591 HP
TORQUE
683 TQ +108 TQ
Stock: 575 TQ
*Measured using 100 octane fuel at the CarBahn San Jose dynamometer.

What's Included

  • CarBahn Stage 2 Performance Controller
  • CarBahn Heat Exchanger
  • CarBahn High Flow Air Filters

Choose your installation method

Set up your controller the way that works for you.

Starting at $2,795.00
Dealer installation labor is not included in this total.

Vehicle Fitment

Compatible vehicles and model years.

Vehicle Model Years
ESTIMATED INSTALLATION TIME
8.0 hours

Typical labor time for this product.

Need professional installation?

Find an authorized CarBahn dealer to arrange installation and request a labor quote.

Find an Authorized Dealer
Questions before you order? Our performance specialists can help.
(866) 558-4314

Performance Controller FAQs

Answers to common questions about installation, upgrades, tuning and warranty coverage.

Do I need an ECU unlock for a Performance Controller?

No. CarBahn Performance Controllers are plug-and-play devices that work with your vehicle's factory ECU without requiring an ECU unlock or software flash. You can install the controller at home or through a professional installer.

Why is a heat exchanger required for Stage 2?

Stage 2 produces additional power and heat, placing greater demands on the charge-air cooling system. The CarBahn Heat Exchanger provides increased cooling capacity to help control intake temperatures and maintain consistent performance.

The required CarBahn Heat Exchanger must be installed to achieve advertised Stage 2 performance and qualify for CarBahn's optional Factory Matching Warranty.

Can I upgrade to ECU reflash software later?

Yes. If you decide to move from a Performance Controller to CarBahn ECU Software, contact our tuning team to arrange the upgrade.

CarBahn offers a $250 controller trade-in credit toward eligible ECU Software purchases. Unlike the controller, ECU Software requires an ECU unlock and a compatible installation process. Your CarBahn dealer can help coordinate the conversion.

Does the warranty cover my powertrain if I install the controller myself?

CarBahn offers an optional Factory Matching Warranty for eligible vehicles and Performance Controller configurations. This provides separate coverage for qualifying powertrain repairs under CarBahn's warranty terms.

Self-installation does not automatically establish or exclude coverage. Your vehicle, installation, required supporting hardware and warranty purchase must satisfy the applicable terms and eligibility requirements.

We recommend confirming your eligibility with our team before installation, particularly if you plan to install the controller yourself.

How do I pair my Performance Controller with the app?

Download the Tuning Pro app and locate the 13-digit serial number on your controller or product cover sheet. Turn on your vehicle's ignition without starting the engine, enable Bluetooth, and disconnect other Bluetooth devices during initial pairing.

Open the app, enter the 13-digit serial number, and use the final six digits as the Bluetooth PIN when prompted. Once connected, select the map appropriate for the fuel in your tank.

View the complete pairing guide

What fuel octane levels are supported?

CarBahn Performance Controllers support selectable calibrations for 91, 93 and 100 octane fuel. Choose the appropriate map through the Tuning Pro app based on the fuel currently in your tank.

Higher-octane maps must only be used with the corresponding fuel. Available power output varies by vehicle and selected calibration.

Can I upgrade from Stage 1 to Stage 2 remotely, or do I need a new controller?

You don't need to purchase an entirely new controller. CarBahn supports remote upgrades from Stage 1 to Stage 2 on eligible Performance Controllers, so the existing unit can be updated without removal.

Stage 2 supporting hardware, including the required CarBahn Heat Exchanger, must be installed before operating the upgraded calibration. Contact our tuning team to confirm your configuration and arrange the upgrade.

Vehicle Fitment & Product Details

  • Type: Tuning & Software
  • Vendor: CarBahn
  • Make: BMW
  • Model(s): M3, M3 Competition, M3 Competition xDrive, M3 CS, M4, M4 Competition, and M4 Competition xDrive
  • Vehicle Year(s): 2021, 2022, 2023, 2024, 2025, 2026, and 2027
  • Transmission(s): Automatic and Manual
  • Chassis: G80, G82, and G83
  • Body Style(s): Coupe, Sedan, and Convertible
  • Drivetrain(s): xDrive and RWD
  • Measured Flywheel Horsepower: 704
  • Part Number: CBG8X-9003
  • Installation Time (hrs): 8
View full details

Stage 2 Performance Controller Package

Unlock more power from your BMW M3/M4 with CarBahn's Stage 2 Performance Controller Package. Engineered for improved acceleration, throttle response and consistent performance.

What's Included

  • Stage 2 Performance Controller for increased horsepower and torque.
  • CarBahn S58 High-Flow Air Filters included at no additional charge.
  • Upgraded Heat Exchanger Kit for improved cooling and Stage 2 operation.
  • Installation Guide with setup instructions.

Performance by Drivetrain

Competition RWD

Fuel Flywheel HP / TQ Wheel HP / TQ
Stock 591 / 575 508 / 494
93 Octane 679 / 654 584 / 562
100 Octane 704 / 683 605 / 587

Competition xDrive

Fuel Flywheel HP / TQ Wheel HP / TQ
Stock 591 / 575 484 / 471
93 Octane 679 / 654 557 / 536
100 Octane 704 / 683 577 / 560

6-Speed Manual

Fuel Flywheel HP / TQ Wheel HP / TQ
Stock 527 / 475 464 / 418
93 Octane 611 / 585 538 / 515
100 Octane 628 / 598 553 / 527

All figures represent horsepower and torque (lb-ft). Flywheel figures are calculated; wheel figures are measured. Actual results may vary based on vehicle configuration, fuel quality and operating conditions.